Pressure Washing
Pressure Washing in Vancouver, BC
Vancouver's wet climate grows moss, algae and mildew on every north-facing surface — siding, stucco, decks, fences, driveways, walkways. Our pressure washing service cleans them safely, restores curb appeal in a single afternoon, and is the foundation of any successful exterior repaint.
Pressure washing is not one-size-fits-all. A 4,000 PSI tip on cedar shingles will tear the wood; the same tip is exactly right for a stained concrete driveway. We carry the full range — from gentle soft-wash systems that use a low-pressure soap-and-rinse for siding and stucco, up through commercial-grade hot-water units for hardscaping. The right pressure for the surface, every time.
Before any exterior painting project we soft-wash the entire envelope to lift dirt, mildew and chalking off the existing paint film. Without this step, new paint won't bond properly and fails fast. We also treat with a mildewcide so re-growth is delayed once the new finish is on.
Standalone pressure-washing visits are also available — driveways before listing, decks before staining, fences before re-coating, soffits and gutters before winter, or just a full envelope wash to refresh the look without a full repaint.
- Soft-wash for siding, stucco, cedar and Hardie
- Higher PSI for concrete, brick and pavers
- Mildewcide treatment to slow regrowth
- Decks, fences and railings included
- Mandatory step before exterior painting
- Surrounding plants and landscaping protected
Our Process
How we deliver pressure washing projects
Walk-through
We confirm surfaces, pressure tier, and protect plants, lights and outlets.
Soft-wash siding
Low-pressure soap, dwell, then gentle rinse to lift mildew and chalking.
High-pressure hardscaping
Driveways, walkways, patios cleaned to the original substrate.
Mildewcide treatment
Optional follow-up to slow re-growth on shaded north-facing walls.
Final rinse & clean-up
All runoff directed safely, plants rinsed, site left tidy.
Built for Vancouver homes & weather
Vancouver, the North Shore and Burnaby get over 1,200 mm of rain a year — moss and algae thrive on every shaded surface. Pressure washing is a yearly maintenance reality here, not a luxury.
Pressure Washing painting questions, answered
How much does pressure washing cost in Vancouver?
Most single-family homes run $300–$700 for a full envelope soft-wash. Driveways and walkways add $200–$500 depending on size. We give a flat quote after a quick on-site look.
Is pressure washing safe for cedar siding?
Only with the correct soft-wash tip and pressure. We use low-pressure soap-and-rinse on cedar to avoid tearing the grain — never a turbo nozzle on raw wood.
Do I need to pressure wash before painting?
Yes — every exterior repaint we do starts with a full soft-wash of the envelope. New paint won't bond to dirty, chalky or mildewed surfaces.
Will it damage my plants?
No. We rinse landscaping before and after with fresh water and dilute any cleaning solutions to safe levels. Sensitive plants get covered.
How often should I pressure wash my home in Vancouver?
Most Vancouver homes benefit from a soft-wash every 1–2 years, especially shaded north and west elevations that grow moss and mildew faster.
Ready to transform your Vancouver home?
Get a free, no-obligation quote from Vancouver's most-trusted residential painters. Fast response, premium results.